Causes and treatment of burning out of the drive motor of the screw conveyor

1、 Main reasons:
1. There are hard blocks or small iron blocks mixed in the material conveyed by the screw conveyor, causing the cutter to get stuck, causing a sharp increase in current and burning the motor.
2. The incoming material is too large, causing the motor of the screw conveyor to overheat and burn out due to overload.

2、 Handling method:
1. Prevent small iron blocks from entering and maintain a certain gap between the cutter and the casing.
2. The screw conveyor ensures balanced feeding and delivers all the materials before stopping.