Depending on the material, the specific gravity of the material and the size of the mesh are different. The angle of the
motor needs to be changed. Change the angle between the upper and lower weights of the motor to adjust the material's trajectory on the screen surface to achieve better Screening effect, then how to adjust the angle of the motor?
1. For materials with relatively large meshes, the angle is usually in the range of five degrees to fifteen degrees, so that the materials can move to the edge quickly, thereby increasing the output.
2. Some materials have relatively small mesh holes. For example, in the case of 40 to 80 mesh, we must appropriately extend the running track of the material on the screen surface to achieve better screening results.
3. If the mesh of the material is required to be more than 80 meshes, then we need to extend the trajectory of the material on it, generally the angle is between 65 and 85.
4. The adjustment of the motor angle. When we face the vertical vibration motor, the upper weight is in your left hand direction, the lower weight is in your right hand direction, and the angle between the two weights facing your body is what we said. angle.
