The difference between swing screen and rotary vibrating screen
2024-03-27
The difference between swing screen and rotary vibrating screen: 1. The working principle of the swing screen is different from that of the rotary vibrating screen. From the perspective of running trajectory, the swing screen is a nonlinear inertial vibrating screen, and its basic rotary motion is similar to manual screening. The material is evenly dispersed on the entire screen surface from the center to the outer edge, thereby spreading in the axial direction in a spiral motion. The fine particles thus complete the entire screening process. The rotary vibrating screen is a screening machine that performs three-dimensional circular motion, so the production sites required by the two screening machines are also different. 2. Different production output If you want large output, it is recommended that you use a swing screen. If you want high precision, you need to use a rotary vibrating screen. This is because the area of contact between the screen surface of the swing screen and the material is large, while the usable area of the rotary vibrating screen is smaller. A larger contact part between the screen surface and the material will effectively increase the product throughput, while a small contact part will effectively improve the screening accuracy. 3. Screening accuracy is different Since the rotary vibrating screen performs three-dimensional motion, and the operation mode of the swing screen determines that the effective screening area is doubled, the screening accuracy can reach more than 95%. 4. Impact on raw materials There is no doubt that the rotary vibrating screen uses the principle of vibration to screen materials. Due to the vibration, the appearance of the materials will be destroyed. Therefore, many granular crystalline and brittle materials are not suitable for screening by the rotary vibrating screen, such as chicken essence and rotary vibrating screen. MSG, sugar, cooked food, etc. The swing screen has a slight elliptical swing motion, does not use vibration, has little impact on the raw materials, will not damage the material shape, and further improves the material output rate. 5. There is a big price difference between the swing screen and the rotary vibrating screen. As a standard product in screening equipment, rotary vibrating screens have been produced for decades. The technology is mature and the supporting equipment is complete, so the price-performance ratio is very high. As a new product, the swing screen is relatively complicated to make and the supporting equipment is not perfect, so the price is generally several times higher than that of the rotary vibrating screen.
