What is the problem when the linear vibrating sieve does not move forward?
2023-09-09
1. The problem of insufficient vibration motor steering/vibration motor excitation force: The linear vibeating screen uses two horizontal vibrating motors as the vibrating screen. The rotation of the motors is divided into two types: forward rotation and reverse rotation. Normally, the rotation of the two motors is in the opposite direction. Wrong connection will cause the motor to rotate in the same direction, and there will be a problem that the material on the screen surface will not go out; 2. Motor installation position problem: There are three installation positions of the vibrating motor of the linear vibrating sieve, namely the bottom, both sides and the upper part. If the vibration motor is installed close to the feed inlet, the material on the screen surface will slow down and stay on the screen surface after running for a certain distance; 3. The height of the discharge port above the screen surface: When designing a linear screen, if the discharge port is higher than the screen surface, the problem of material stagnation on the screen surface will occur during the production process. 4. The screen surface of the screen is not tensioned or damaged The tension of the screen and the flatness of the screen surface directly determine whether the material is evenly stressed and the speed of feeding and feeding. During long-term use, due to the impact of materials or wrong feeding methods that are fast and slow, some parts of the screen surface will be loose or damaged, which is usually the culprit that causes the linear vibrating screen to not discharge materials; replace the screen If the net is fixed after it is not tensioned, it will also cause the problem of slow feeding. 5. The screen box is not installed horizontally The screen box of the small linear vibrating screening machine is a shelf for the screen and the grid. Its level directly affects whether the screen and the grid are horizontal. If the screen box cannot be installed horizontally on the same level, it will cause The inclination of the screen surface leads to a deviation in the force of the material, and it cannot flow in a straight line as planned.
