Quartz sand bucket elevator

The beneficiation process of quartz sand is mainly impurity removal and purification to remove a small or slight amount of impurities in quartz sand and obtain a highly difficult separation technology of refined quartz sand or high-purity quartz sand. To obtain the quartz sand, the forklift will send the quartz sand to the silo. A conveyor is placed at the tail of the silo. The quartz sand from the tail is sent to the vibrating feeder through the conveyor. The vibrating feeder evenly feeds the quartz sand to the jaw crusher directly below (coarse crushing) for preliminary crushing, and then the produced coarse material is transported to the fine crusher by the conveyor for further crushing, The finely crushed stones are put into the vibrating screen to screen out three stones and stones of different sizes, and the large stones exceeding the specifications are returned to the fine crusher for crushing again. Qualified products are finished sand after being cleaned by sand washing machine (optional).
A conveyor is placed at the end of the silo, and the bucket elevator produced and sold by Henan Chunying environmental protection equipment Co., Ltd. can be used to transport gravel.Bucket elevator conveying dry product or solid product from low to high, supply automatic continuous conveying operation. At the top of the conveyor, the bucket rotates over and dumps the product out. The bucket then travels down the back side of the frame to be filled again. A bucket elevator has two chains which carry the buckets. The buckets are closely spaced together allowing for a nearly continuous flow of product.Adjusting transfer speeds could up and down conveying capacity. Lifting height is selected as your Location design request.